Honda CR-V: Automatic Transmission

Special Tools

Honda CR-V. Automatic Transmission

07HAE-PL50101 may also be used to substitute one of 07LAE-PX40100.

Honda CR-V. Automatic Transmission

  1. Mainshaft Holder
  2. Attachment, 78 x 90 mm
  3. Clutch Spring Compressor Bolt Assembly
  4. Holder Handle
  5. Oil Seal Driver Attachment
  6. Attachment, 40 x 50 mm
  7. Clutch spring Compressor Attachment
  8. Bearing Installer Attachment
  9. Installer Shaft
  10. A/T Pressure Hose, 2,210 mm
  11. A/T Pressure Hose Adapter
  12. Attachment, 78 x 80 mm
  13. Attachment, 42 mm I.D.
  14. Companion Flange Holder
  15. Clutch Compressor Attachment
  16. Tapered Bearing Outer Race Attachment
  17. Preload Inspection Tool
  18. A/T Clutch Pressure Gauge Set/Panel
  19. Adjustable Bearing Puller, 25-40 mm

Honda CR-V. Automatic Transmission

07736-A01000B or 07736-A01000A must be used with commercially available 3/8 "-16 slide hammer.

Honda CR-V. Automatic Transmission

  1. Attachment, 32 x 35 mm
  2. Attachment, 42 x 47 mm
  3. Attachment, 52 x 55 mm
  4. Attachment, 62 x 68 mm
  5. Attachment, 72 x 75 mm
  6. Attachment, 22 x 24 mm
  7. Attachment, 40 x 42 mm
  8. Driver, 40 mm 1.0.
  9. Attachment, 35 mm 1.0.
  10. Driver
  11. Oil Seal Driver Attachment
  12. Oil Seal Driver Attachment

READ NEXT:

 General Troubleshooting Information

How to Check for DTCs with the Honda Diagnostic System (HDS) When the powertrain control module (PCM) senses an abnormality in the input or output system, the D indicator (A) in the gauge control modu

 System Description

 General Operation

The automatic transmission is a combination of a 3-element torque converter and triple-shaft electronically controlled unit which provides 5 speeds forward and 1 reverse. The entire unit is position

SEE MORE:

 Tire Pressure Monitoring System (TPMS) - Required Federal Explanation

Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indica

 DTC P2122: Accelerator Pedal Position (APP) Sensor A (Throttle Position Sensor D) Circuit Low Voltage Input

NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review General Troubleshooting Information. 1. Clear the DTC with the HDS. 2. Turn the ignition switch ON. 3. Check whether DTC P2122 is indicated in the DTCs/ Freeze Data in PGM-FI Mode Menu with the HDS. Is D

© 2016-2025 Copyright www.hcrv.net