Honda CR-V: Audio, Navigation, and Telematics

Honda CR-V (2006–2011) Service Manual / Audio, Navigation, and Telematics

READ NEXT:

 Audio System

Component Location Index LEFT REAR DOOR SPEAKER AUDIO REMOTE SWITCH (Except LX model) LEFT TWEETER (Except LX model) DRIVER'S DOOR SPEAKER AUDIO UNIT NAVIGATION UNIT RIGHT TWEETER (Except LX

 System Description

Overview The audio unit acts as the "processor" for all audio functions. Select audio functions from the audio unit, the audio remote (on the steering wheel), or by using the navigation voice control

 Self-diagnostic Function

Without Navigation The audio system has a self-diagnostic function. To run the self-diagnostic function, do the following: How to check for audio system condition NOTE: The audio unit must be in the

SEE MORE:

 DTC Troubleshooting

DTC indicator 1: An Open in the Air Mix Control Motor Circuit 1. Start the engine. 2. Turn on the A/C, then set the temperature control dial to Max Hot. 3. Turn the ignition switch OFF and then ON (II). 4. Do the self-diagnostic with the HVAC control unit. 5. Check for DTCs. Is DTC 1 indicated?

 Cam Chain Removal

NOTE: Keep the cam chain away from magnetic fields. 1. Remove the front wheels. 2. Remove the splash shield (see step 21). 3. Remove the drive belt. 4. Remove the cylinder head cover. 5. Set the No.1 piston at top dead center (TDG). The punch mark (A) on the variable valve timing control (VTG) a

© 2016-2025 Copyright www.hcrv.net