Honda CR-V: Using a Track List

You can also select a file directly

You can also select a file directly from a track list on the audio display.

Press the AUDIO button to show the audio display, then touch the Track List icon. The track list menu appears on the display.

To scroll through the display, touch

To scroll through the display, touch the icon on the side of the or icon on the side of the icon on the side of the screen. To go back to the previous display, touch the Return icon.

To play a file, touch its icon on the screen. The current folder is highlighted in blue.

To Select Repeat, Random or Scan Mode:

You can select any type of repeat, random and scan modes by using the RPT button, RDM button, or SCAN button.

TRACK REPEAT - This feature continuously plays a file. To activate the track repeat feature, press the RPT button (Preset 1). You will see ‘‘TRACK REPEAT’’ in the display.

To turn it off, press the RPT button (Preset 1).

FOLDER REPEAT - This feature replays all the files in the selected folder in the order they are stored.

To activate the folder repeat feature, press and hold the RPT button (Preset 1). You will see ‘‘FOLDER REPEAT’’ in the display. To turn it off, press and hold the RPT button (Preset 1).

TRACK RANDOM - This feature plays all the files in random order.

To activate the track random feature, press the RDM button (Preset 2).

You will see ‘‘TRACK RANDOM’’ in the display. To turn it off, press the RDM button (Preset 2).

FOLDER RANDOM - This feature plays the files in the selected folder in random order. To activate the folder random feature, press and hold the RDM button (Preset 2). You will see ‘‘FOLDER RANDOM’’ in the display. To turn it off, press and hold the RDM button (Preset 2).

TRACK SCAN - This feature samples all files in the selected folder in the order they are stored.

To activate the scan feature, press the SCAN button. You will see ‘‘TRACK SCAN’’ in the display. You will also see the file number blinking.

You will get a 10 second sampling of each file in the folder. Press the SCAN button to get out of the scan mode. The system plays the last file sampled.

FOLDER SCAN - This feature samples the first file in each folder in the order they are stored. To activate the folder scan feature, press and hold the SCAN button.

You will see ‘‘FOLDER SCAN’’ in the display. You will also see the folder number blinking. You will get a 10 second sampling of the first file in each folder. Press the SCAN button to get out of the scan mode. The system plays the last file sampled.

READ NEXT:

 To Stop Playing a USB Flash Memory Device

To play the radio, press the AM/FM button or touch the FM1, FM2, AM, XM1, or XM2 icon. Touch the CD icon to switch to the disc mode (if a disc is loaded). Each time you press the CD/XM butto

 Disconnecting a USB Flash Memory Device

You can disconnect the USB flash memory device at any time even if the USB mode is selected on the audio system. Always follow the USB flash memory device’s instructions when you remove it

 USB Flash Memory Device Error Messages

If you see an error message on the screen while playing a USB flash memory device, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to yo

SEE MORE:

 Cylinder Head Removal

NOTE: Use fender covers to avoid damaging painted surfaces. To avoid damage, unplug the wiring connectors carefully while holding the connector portion. To avoid damaging the cylinder head, wait until the engine coolant temperature drops below 100 ºF (38 ºC) before loosening the cylinder h

 General Troubleshooting Information

Tips and Precautions Before Troubleshooting 1. Check applicable fuses in the appropriate fuse/relay box. 2. Check the battery for damage, state of charge, and clean and tight connections. NOTICE Do not quick-charge a battery unless the battery ground cable has been disconnected, otherwise you w

© 2016-2021 Copyright www.hcrv.net