Honda CR-V: Navigation System

Component Location Index

Honda CR-V. Navigation System

READ NEXT:

 General Troubleshooting Information

General Operation Refer to the navigation system manual, for the navigation system operating procedures. Anti-theft Feature The navigation system has a coded theft protection circuit. Make sure you ha

 System Description

Overview The navigation system is a highly sophisticated, hybrid locating system. The navigation unit uses global positioning system (GPS) satellite signals, internal yaw and vehicle speed inputs, a

 Symptom Troubleshooting

No picture is displayed NOTE: Always check the connectors for poor connections or loose terminals between the audio unit, audio disc changer, navigation unit, and XM receiver. 1. Check the No. 23 (10

SEE MORE:

 Ignition Switch

The ignition switch has four positions: LOCK (0), ACCESSORY (I), ON (II), and START (III). LOCK (0) - You can insert or remove the key only in this position. To turn the key, the shift lever must be in Park, and you must push the key in slightly. If the front wheels are turned, the

 DTC 51: Motor Locked

1. Turn the ignition switch ON (II). 2. Clear the DTC with the HDS. 3. Test-drive the vehicle. Drive the vehicle at 10 mph (15 km/h) or more, with the engine speed at 2,500 rpm or more. 4. Check for DTCs with the HDS. Is DTC 51 indicated? YES-Replace the VSA modulator-control unit. NO-Intermitt

© 2016-2025 Copyright www.hcrv.net