Honda CR-V: TPMS (Tire Pressure Monitoring System)
Honda CR-V (2006–2011) Service Manual / Suspension / TPMS (Tire Pressure Monitoring System)
Component Location Index
- TPMS CONTROL UNIT
(Behind the dashboard center lower cover)
- Replacement
- TIRE PRESSURE SENSOR
- Replacement
- TIRE PRESSURE SENSOR
- Replacement
- UNDER-DASH FUSE/RELAY BOX
- TIRE PRESSURE SENSOR
- Replacement
- DATA LINK CONNECTOR (DLC)
- TIRE PRESSURE SENSOR
- Replacement
- UNDER-HOOD FUSE/RELAY BOX
- General Troubleshooting Information
- Memorizing the Tire Pressure Sensor ID
- DTC Troubleshooting
- Symptom Troubleshooting
- Tire Pressure Sensor Replacement
READ NEXT:
General Troubleshooting Information
System Indicator locations
The system has two indicators.
The low pressure indicator (A)
The TPMS indicator (B)
How TPMS Works
The TPMS (tire pressure monitoring system) has a low
pressure indica
Memorizing the Tire Pressure Sensor ID
Special Tools Required
TPMS sensor initializer tool AKS0620006
Available through the American Honda Tool and
Equipment program, 888-424-6857.
All four tire pressure sensor IDs must be memorized to
th
DTC Troubleshooting
DTC 11, 13, 15, 17: Low Tire Pressure
NOTE: If low tire pressure is detected, the control unit
sets one or more of these DTCs, and turns on the low
pressure indicator. If the low pressure indicator co
SEE MORE:
Replacing a Parking Light/Front Side Marker Light Bulb
1. Open the hood.
To change the parking light/front
side marker on the driver’s side,
remove the fuse box fromits stay
by pulling out.
2. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
3. Pull the bulb straight out of its
socket. P
EVAP Canister Replacement
1. Lift the vehicle, and support it with jackstands.
2. Remove the cover (A).
3. Remove the EVAP canister baffle cover (A).
4. Disconnect the hoses (A) and the fuel subharness
6P connector (B).
5. Remove the bolts (C) and the EVAP canister bracket
(D).
6. Remove the EVAP canister (A) from the E
© 2016-2025 Copyright www.hcrv.net
