Honda CR-V: VSA (Vehicle Stability Assist) System Components

Honda CR-V (2006–2011) Service Manual / Brakes / VSA (Vehicle Stability Assist) System Components

Component Location Index

Honda CR-V. VSA (Vehicle Stability Assist) System Components

READ NEXT:

 General Troubleshooting Information

System Indicator This system has four indicators: ABS indicator (A) Brake system indicator (B) VSA indicator (C) VSA activation indicator (D) When the system detects a problem, it will turn the

 System Description

VSA Modulator-control Unit Inputs and Outputs for 46P Connector System Outline This system is composed of the VSA modulator-control unit, the wheel sensors, the steering angle sensor, and the yaw

 DTC Troubleshooting

SEE MORE:

 Power Door Locks

To lock all doors and the tailgate, push the top of the master door lock switch on either front door, pull the lock tab rearward on the driver’s door, or use the key on the outside lock on the driver’s door. Pushing the rear of either master door lock switch will unlock all door

 Brake Pedal Position Switch Signal Circuit Troubleshooting

1. Turn the ignition switch ON (II). 2. Check the BRAKE SWITCH in the DATA LIST with the HDS. Does it indicate OFF? YES-Go to step 3. NO-Inspect the brake pedal position switch. 3. Press the brake pedal, and check the BRAKE SWITCH in the DATA LIST with the HDS. Does it change to ON? YES-The bra

© 2016-2026 Copyright www.hcrv.net