Honda CR-V manuals

Honda CR-V: Steering Gearbox

Honda CR-V (2006–2011) Service Manual / Steering / Steering Gearbox

READ NEXT:

 Steering Gearbox Removal

Special Tools Required Ball joint remover, 28 mm 07MAC-SL0A202 Note these items during removal: Using solvent and a brush, wash any oil and dirt off the valve body unit, it's lines, and the end of

 Steering Gearbox Overhaul

Exploded View Special Tools Required Cylinder end seal remover attachment 070AF-S7S0100 Valve seal ring sizing tool 07NAG-SR3090A Sleeve seal ring guide 07YAG-S2X0100 Sleeve seal ring sizing t

 Steering Gearbox Installation

NOTE: The illustrations show 2WD. 1. Before installing the steering gearbox, make sure that no power steering fluid is on the mating surface of the steering gearbox and the front subframe. To prevent

SEE MORE:

 DTC Troubleshooting

DTC B1000: Communication Bus Line Error (Bus-off) 1. Clear the DTCs with the HDS. 2. Turn the ignition switch OFF, and then back ON (II). 3. Wait for 6 seconds or more. 4. Check for DTCs with the HDS. Is DTCs B1000 and/or B1008 and B1011 indicated? YES-Go to step 5. NO-Intermittent failure, the

 Accessory Power Sockets

Component Location Index CONSOLE ACCESSORY POWER SOCKET RELAY CONSOLE ACCESSORY POWER SOCKET FRONT ACCESSORY POWER SOCKET UNDER-DASH FUSE/RELAY BOX FRONT ACCESSORY POWER SOCKET RELAY CARGO AREA ACCESSORY POWER SOCKET RELAY CARGO AREA ACCESSORY POWER SOCKET Circuit Diagram Front Ac

© 2016-2026 Copyright www.hcrv.net