Honda CR-V: Removing a Disc

To remove a disc from the audio unit, fold back the screen by pressing the OPEN button. Press the disc eject button ( remove the disc. If you eject the disc, ) to remove the disc. If you eject the disc, but do not remove it from the slot, the system will automatically reload it after 10 seconds and put it in pause mode. To begin playing, press the CD/XM button.

To return the screen to the upright position, press the CLOSE button.

You cannot close the screen if a disc is partially inserted into its slot.

You can also eject the disc when the ignition switch is off.

READ NEXT:

 Disc Player Error Messages (EX-L model with navigation system)

If you see an error message in the display while playing a disc, find the cause in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer. The cha

 CD Changer (EX-L model with navigation system)

CD Changer (EX-L model with navigation system)

 Loading CDs in the Changer

Your vehicle has the CD changer in the center console. CD-R, CD-RWdisc, and CD compressed inMP3 andWMA will not work in this unit. Video CDs and DVD discs also will not work. Do not spill an

SEE MORE:

 Tailgate

Tailgate Adjustment NOTE: Have an assistant help you when adjusting the tailgate. Take care not to scratch the tailgate, body, and other related parts. Put on gloves to protect your hands. 1. Remove these items: Quarter pillar glass trim, both sides Tailgate weatherstrip, as needed Cargo

 Side Engine Mount Bracket Replacement

1. Support the engine with a jack and wood block under the oil pan. 2. Remove the upper torque rod. 3. Remove the ground cable (A), then remove the side engine mount bracket (B). 4. Install the side engine mount bracket, then loosely tighten the new bolt and nut (C), and loosely tighten the bolt

© 2016-2025 Copyright www.hcrv.net