Honda CR-V: Horns

Component Location Index

Honda CR-V. Horns

Circuit Diagram

Honda CR-V. Horns

Horn Switch Test

1. Remove the steering column covers.

2. Disconnect the dashboard wire harness 20P connector (A) from the cable reel (B).

Honda CR-V. Horns

3. Using a jumper wire, connect the dashboard wire harness 20P connector No.1 terminal to body ground. The horns should sound.

Honda CR-V. Horns

4. Reconnect the dashboard wire harness 20P connector (A) to the cable reel (B).

Honda CR-V. Horns

5. Remove the driver's airbag assembly, and disconnect the horn switch 1P positive terminal (C) from the driver's airbag.

6. Check for continuity between the dashboard wire harness 20P connector No.1 terminal and the cable reel subharness 20P connector No. 11 terminal.

Honda CR-V. Horns

7. Check for continuity between the cable reel subharness 20P connector No. 11 terminal and the horn switch 1P positive terminal.

Honda CR-V. Horns

Horn Test/Replacement

1. Remove the front bumper.

2. Disconnect the 1P connector (A) from the horn (B).

Honda CR-V. Horns

3. Test the horn by connecting battery power to the terminal (A) and grounding the bracket (B). The horn should sound.

Honda CR-V. Horns

4. If it fails to sound, replace it.

READ NEXT:

 Exterior Lights

Component Location Index DAYTIME RUNNING LIGHTS CIRCUIT HEADLIGHTS FRONT SIDE MARKER/PARKING/ TURN SIGNAL LIGHTS HIGH MOUNT BRAKE LIGHT LICENSE PLATE LIGHT TAILLIGHT and BRAKE LIGHT REA

 System Description

Headlights System Description The headlight system is composed of the MICU, the headlight and dimmer/flash-to-pass switches (inside the combination light switch), the left and right headlights, and t

 DTC Troubleshooting

DTC B1078: Daytime Running Lights Signal Error (Canada) DTC B1079: Daytime Running Lights Signal Error (USA) NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN

SEE MORE:

 Security System

If equipped The security system helps to protect your vehicle and valuables from theft. The horn sounds and a combination of headlights, parking lights, side marker lights and taillights flash if someone attempts to break into your vehicle or remove the audio unit. This alarm continues

 Tire Pressure Sensor Replacement

Removal 1. Raise the vehicle, and support it with safety stands in the proper locations. 2. Remove the wheel with the faulty sensor. 3. Remove the tire valve cap and the valve core, and let the tire deflate. 4. Remove any balance weights, and then break the bead loose from the wheel with a comme

© 2016-2025 Copyright www.hcrv.net