Honda CR-V: Adding Engine Oil

Unscrew and remove the engine oil

Unscrew and remove the engine oil fill cap on top of the valve cover.

Pour in the oil slowly and carefully you do not spill any. Clean up any spills immediately. Spilled oil could damage components in the engine compartment.

Reinstall the engine oil fill cap, and tighten it securely. Wait a few minutes, and recheck the oil level on the engine oil dipstick. Do not fill above the upper mark; you could damage the engine.

READ NEXT:

 Recommended Engine Oil

Oil is a major contributor to your engine’s performance and longevity. Always use a premium-grade 0W-20 detergent oil displaying the API Certification Seal. This seal indicates the oil is e

 Synthetic Oil

You may use a synthetic motor oil if it meets the same requirements given for a conventional motor oil: it displays the API certification seal, and it is the proper weight. You must follow t

 Engine Oil Additives

Your vehicle does not require any oil additives. Additives may adversely affect the engine or transmission performance and durability.

SEE MORE:

 System Diagnostic Mode

Start-up procedure and Diagnosis Menu 1. Turn the ignition switch to the ON (II) position. Press and hold the Menu, the Map/Guide, and the Cancel buttons. Keep them pressed for approximately 3 seconds. The display screen then goes directly to the Diagnostic Menu. DIAGNOSTIC MENU SCREEN 2. After th

 Carrying Cargo

Your vehicle has several convenient storage areas: Lower glove box Upper glove box Console compartment Door pockets Seat-back pockets Seat-under tray (if equipped) Center pocket Cargo area, including the rear seats when folded up or down. Upper and lower cargo areas with the dual deck c

© 2016-2025 Copyright www.hcrv.net