Honda CR-V: Installing a Child Seat with a Tether

A child seat with a tether can be installed in any seating position in the back seat.

Each rear outside seating position has an anchorage point on the seatback, and the center seating position has an anchorage point in the ceiling near the tailgate.

Since a tether can provide additional security to the lap/shoulder belt installation, we recommend using a tether whenever one is required or available.

Using an Outer Anchor

1. On vehicles with the dual deck

1. On vehicles with the dual deck cargo shelf, remove it.

2. After properly securing the child seat with the lap/shoulder belt, route the tether strap over the top of the seat-back and through the legs of the head restraint.

3. Attach the tether strap hook to the

3. Attach the tether strap hook to the anchor, making sure the tether strap is not twisted.

4. Tighten the strap according to the seat maker’s instructions.

5. Reinstall the dual deck cargo shelf.

Using the Center Anchor

1. Remove the rear center head

1. Remove the rear center head restraint, and store it in the cargo area.

2. After properly securing the child seat, open the anchor cover.

3. Route the tether strap over the

3. Route the tether strap over the seat-back, then attach the tether strap hook to the anchor, making sure the tether strap is not twisted.

4. Tighten the strap according to the seat maker’s instructions.

READ NEXT:

 Protecting Larger Children

When a child reaches the recommended weight or height limit for a forward-facing child seat, the child should sit in a back seat on a booster seat and wear the lap/ shoulder belt. The follo

 Checking Seat Belt Fit

To determine if a lap/shoulder belt properly fits a child, have the child put on the seat belt, then ask yourself: 1. Does the child sit all the way back against the seat? 2. Do the chil

 Using a Booster Seat

A child who has outgrown a forwardfacing child seat should ride in a back seat and use a booster seat until the lap/shoulder belt fits them properly without the booster. Some states, Cana

SEE MORE:

 Radio Frequencies

The radio can receive the complete AM and FM bands. Those bands cover these frequencies: AM band: 530 to 1,710 kHz FM band: 87.7 to 107.9 MHz Radio stations on the AM band are assigned frequencies at least 10 kHz apart (530, 540, 550). Stations on the FM band are assigned frequencies at

 AuthorizedManuals

Purchasing Factory Authorized Manuals (U.S. only) The publications shown below can be purchased from Helm Incorporated. You can order by phone or online: - Call Helm Inc. at 1-800-782-4356 (credit card orders only) - Go online at www. helminc. com If you are interested in other years or mode

© 2016-2025 Copyright www.hcrv.net