Honda CR-V: Fan, Fan Motor, Shroud Removal and Installation
Removal
1. Remove the hood support rod, then use it as shown
to prop the hood in the wide-open position.

2. Remove the bulkhead cover.
3. Disconnect the fan motor connectors (A) and hood
switch connector (B), then remove the harness clips
(C).

4. Remove the radiator upper brackets (A), then
remove the front bulkhead (B).

5. Remove the condenser fan shroud assembly (A),
then remove the radiator fan shroud assembly (B)
from condenser fan shroud side.

6. Disassemble the fan shrouds.

Installation
1. Assemble the fan shrouds.

2. Install the radiator fan shroud assembly (A), then
install the condenser fan shroud assembly (B).

3. Install the front bulkhead (A), then install the
radiator upper brackets (B).

4. Apply body paint to the bulkhead mounting bolts.
5. Connect the fan motor connectors (A) and hood
switch connector (B), then install the harness clips
(C).

6. Remove the bulkhead cover.
READ NEXT:
For Japan-produced Model
1. Drain the engine coolant.
2. Remove the hood support rod, then use it as shown
to prop the hood in the wide-open position.
3. Remove the bulkhead cover.
4. Remove the co
Component Location Index
RADIATOR FAN RELAY
A/C CONDENSER FAN RELAY
FAN CONTROL RELAY
A/C CONDENSER FAN ASSEMBLY
RADIATOR FAN ASSEMBLY
ENGINE COOLANT TEMPERATURE
(ECT) SENSOR 1
E
SEE MORE:
No picture is displayed
NOTE: Always check the connectors for poor
connections or loose terminals between the audio unit,
audio disc changer, navigation unit, and XM receiver.
1. Check the No. 23 (10 A) fuse in the under-hood
fuse/relay box and No. 34 (7.S A) fuse in the under-dash
fuse/relay box, a
Press the AM, FM, AUX button, or
CD/AUX, XM button to switch to
the radio or satellite radio (U.S.
models), while a disc is playing.
Press the CD button again to play
the disc.
If you turn the system off while a
disc is playing, either with the
(
) button or by turning off the
ignit
© 2016-2025 Copyright www.hcrv.net
