Honda CR-V: Rear Bumper

Rear Bumper Removal/Installation

NOTE:

1. Remove the rear splash guard.

2. Remove the caps (A). Remove the bolts (B, C) and clips (D) securing the rear bumper (E).

Honda CR-V. Bumpers

3. Pullan the rear bumper (A) at the wheel arch areas to release it from the hooks (B) on the side spacers (C).

Honda CR-V. Bumpers

4. With the help of an assistant, while pulling the wheel arch portion away from the side spacer (A), pull the rear bumper (B) to release the bumper from the hooks (C) on the upper bracket (D).

Honda CR-V. Bumpers

5. Remove the rear bumper absorber (A) from the rear bumper beam (B).

Honda CR-V. Bumpers

6. Install the bumper in the reverse order of removal, and note these items:

Rear Bumper Disassembly/Reassembly

NOTE: Take care not to scratch the bumper faces.

1. Remove the rear bumper.

2. Remove the clips, then separate the left rear bumper face (A), right rear bumper face (B) and lower rear bumper face (C).

Honda CR-V. Bumpers

3. Remove the clip (A) and screw (B), then remove the rear bumper under trim (C) from the lower rear bumper face (D).

Honda CR-V. Bumpers

4. Reassemble the bumper faces in the reverse order of disassembly, and note these items:

Rear Bumper Reflector Replacement

NOTE:

1. Remove the rear bumper.

2. Release the hook (A), then remove the rear bumper reflector (B).

Honda CR-V. Bumpers

3. Reattach the hook to the rear bumper first, and push the clip into place securely.

READ NEXT:

 Hood

Hood Adjustment 1. Remove these items: Front bulkhead cover Front fender trim Cowl cover 2. Slightly loosen each bolt (A). 3. Adjust the hood alignment in this sequence: Adjust the hood right

 Tailgate

Tailgate Adjustment NOTE: Have an assistant help you when adjusting the tailgate. Take care not to scratch the tailgate, body, and other related parts. Put on gloves to protect your hands. 1. R

 Fuel Fill Door

Fuel Fill Door Adjustment 1. Remove the nut (A), then remove the open spring (B). 2. Slightly loosen the hinge mounting bolts (A). 3. Adjust the fuel fill door (B) in or out until it's flush with th

SEE MORE:

 Opening and Closing the Hood

1. Park the vehicle, and set the parking brake. Pull the hood release handle located under the lower left corner of the dashboard. The hood will pop up slightly. 2. Reach in between the hood and the front grille with your fingers. The hood latch handle is above the ‘‘H’’ log

 Protecting Infants

Child Seat Type An infant must be properly restrained in a rear-facing, reclining child seat until the child reaches the seat maker’s weight or height limit for the seat, and the child is at least one year old. Only a rear-facing child seat provides proper support for a baby’s

© 2016-2025 Copyright www.hcrv.net