Honda CR-V: Calculating Fuel Economy

Measuring Techniques

Direct calculation is the recommended source of information about your actual fuel economy.

Using frequency of fill-ups or taking fuel gauge readings are NOT accurate measures of fuel economy.

Fuel economy may improve over the first several thousand miles (kilometers).

Checking Your Fuel Economy

1) Fill the fuel tank until the nozzle automatically clicks off.

1) Fill the fuel tank until the nozzle automatically clicks off.

2) Reset trip counter to zero.

3) Record the total gallons (liters) needed to refill.

4) Follow one of the simple calculations above.

READ NEXT:

 Accessories and Modifications

Modifying your vehicle, or installing some non-Honda accessories, can make it unsafe. Before you make any modifications or add any accessories, be sure to read the following information.

 Accessories

Your dealer has Honda accessories that allow you to personalize your vehicle. These accessories have been designed and approved for your vehicle, and are covered by warranty. Although non-Hon

 Modifying Your Vehicle

Removing parts from your vehicle, or replacing components, with non-Honda components could seriously affect your vehicle’s handling, stability, and reliability. Here are some examples: Low

SEE MORE:

 Changing a Tire with TPMS

If you have a flat tire, the low tire pressure indicator will come on. Replace the flat tire with the compact spare tire. Each wheel (except the compact spare tire wheel) is equippedwith a tire pressure sensor. You must use TPMS specific wheels. It is recommended that you always have

 DTC P0107: Manifold Absolute Pressure (MAP) Sensor Circuit Low Voltage Input

NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review General Troubleshooting Information. 1. Clear the DTC with the HDS. 2. Turn the ignition switch OFF, then turn it ON (II) again. 3. Check whether DTC P0107 is indicated in the DTCs/ Freeze Data in PGM-FI M

© 2016-2026 Copyright www.hcrv.net