Honda CR-V: Parking Brake

To apply the parking brake, push the

To apply the parking brake, push the pedal down with your foot. To release it, push on the pedal again.

The parking brake indicator on the instrument panel should go out when the parking brake is fully released.

Driving the vehicle with the parking

Driving the vehicle with the parking brake applied can damage the rear brakes and hubs. A beeper will sound if the vehicle is driven with the parking brake on.

READ NEXT:

 Steering Wheel Adjustment

Make any steering wheel adjustment before you start driving. Adjusting the steering wheel position while driving may cause you to lose control of the vehicle and be seriously injured in

 Keys and Locks

The master key fits all the locks on your vehicle. The valet key works only in the ignition and the driver’s door lock. You can keep the glove box locked when you leave your vehicle an

 Immobilizer System

The immobilizer system protects your vehicle from theft. If an improperly coded key (or other device) is used, the engine’s fuel system is disabled. When you turn the ignition switch to t

SEE MORE:

 To Stop Playing a Disc

Press the eject button ( ) to remove the disc. If you eject the disc, but do not remove it from the slot, the system will automatically reload the disc after 10 seconds and put it in pause mode. To begin playing, press the CD/AUX button. You can also eject the disc when the igniti

 Selecting a Child Seat

When buying a child seat, you need to choose either a conventional child seat, or one designed for use with the Lower Anchors and Tethers for CHildren (LATCH) system. Conventional child seats must be secured to a vehicle with a seat belt, whereas LATCH-compatible seats are secured by

© 2016-2025 Copyright www.hcrv.net