Honda CR-V: Automatic Transmission

READ NEXT:

 Shift Lever Position Indicators

These indicators on the instrument panel show which position the shift lever is in. The ‘‘D’’ indicator comes on for a few seconds when you turn the ignition switch to the ON (II)

 Shifting

To shift from any position, press firmly on the brake pedal and the release button on the side of the shift lever. You cannot shift out of Park when the ignition switch is in the LOCK (0)

 Engine Speed Limiter

If you exceed the maximum speed for the gear you are in, the engine speed will enter into the tachometer’s red zone. If this occurs, you may feel the engine cut in and out. This is caused

SEE MORE:

 Engine Block

Special Tools Oil Seal Driver Attachment, 96 mm Driver Component Location Index BAFFLE PLATE LOVER BLOCK DOWEL PINS CRANKSHAFT OIL SEAL, TRANSMISSION END THRUST WASHERS ENGINE BLOCK CRANKSHAFT MAIN BEARINGS PISTON RINGS PISTON PIN PISTON CONNECTING

 Charging System Indicator Circuit Troubleshooting

1. Turn the ignition switch ON (II). Does the charging system indicator come on? YES-Go to step 2. NO-Go to step 14. 2. Start the engine. Hold the engine speed at 2,000 rpm for 1 minute. Does the charging system indicator go off? YES-Charging system indicator circuit is OK. Go to the alternator

© 2016-2025 Copyright www.hcrv.net