Honda CR-V: Installing a Child Seat with a Tether

A child seat with a tether can be installed in any seating position in the back seat.

Each rear outside seating position has an anchorage point on the seatback, and the center seating position has an anchorage point in the ceiling near the tailgate.

Since a tether can provide additional security to the lap/shoulder belt installation, we recommend using a tether whenever one is required or available.

Using an Outer Anchor

1. On vehicles with the dual deck

1. On vehicles with the dual deck cargo shelf, remove it.

2. After properly securing the child seat with the lap/shoulder belt, route the tether strap over the top of the seat-back and through the legs of the head restraint.

3. Attach the tether strap hook to the

3. Attach the tether strap hook to the anchor, making sure the tether strap is not twisted.

4. Tighten the strap according to the seat maker’s instructions.

5. Reinstall the dual deck cargo shelf.

Using the Center Anchor

1. Remove the rear center head

1. Remove the rear center head restraint, and store it in the cargo area.

2. After properly securing the child seat, open the anchor cover.

3. Route the tether strap over the

3. Route the tether strap over the seat-back, then attach the tether strap hook to the anchor, making sure the tether strap is not twisted.

4. Tighten the strap according to the seat maker’s instructions.

READ NEXT:

 Protecting Larger Children

When a child reaches the recommended weight or height limit for a forward-facing child seat, the child should sit in a back seat on a booster seat and wear the lap/ shoulder belt. The follo

 Checking Seat Belt Fit

To determine if a lap/shoulder belt properly fits a child, have the child put on the seat belt, then ask yourself: 1. Does the child sit all the way back against the seat? 2. Do the chil

 Using a Booster Seat

A child who has outgrown a forwardfacing child seat should ride in a back seat and use a booster seat until the lap/shoulder belt fits them properly without the booster. Some states, Cana

SEE MORE:

 Protecting Infants

Child Seat Type An infant must be properly restrained in a rear-facing, reclining child seat until the child reaches the seat maker’s weight or height limit for the seat, and the child is at least one year old. Only a rear-facing child seat provides proper support for a baby’s

 ATF Replacement

NOTE: Keep all foreign particles out of the transmission. 1. Park the vehicle on the level ground. 2. Warm up the engine to normal operating temperature (the radiator fan comes on), and turn the engine off. 3. Remove the drain plug (A), and drain the automatic transmission fluid (ATF). NOTE: If

© 2016-2025 Copyright www.hcrv.net