Honda CR-V: Inside Day/Night Mirror - If Equipped
Ram Truck 1500 2500 3500 Owner's Manual / Understanding The Features Of Your Vehicle / Mirrors / Inside Day/Night Mirror - If Equipped
A single ball joint mirror is provided in the vehicle. It is a twist on mirror that has a fixed position at the windshield.
The mirror installs on the windshield button with a counterclockwise rotation and requires no tools for mounting. The mirror head can be adjusted up, down, left, and right for various drivers. The mirror should be adjusted to center on the view through the rear window.
Headlight glare from vehicles behind you can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle). The mirror should be adjusted while the small control under the mirror is set in the day position (toward the windshield).
.png)
Adjusting Rearview Mirror
READ NEXT:
Automatic Dimming Mirror - If Equipped
A single ball joint mirror is provided in the vehicle. It is
a twist on mirror that has a fixed position at the windshield.
The mirror installs on the windshield button with
a counterclockwise rotati
Automatic Dimming Mirror With Rear View
Camera Display - If Equipped
A single ball joint mirror is provided in the vehicle. It is
a twist on mirror that has a fixed position at the windshield.
The mirror installs on the windshield button with
a counterclockwise rotati
Outside Mirrors
To receive maximum benefit, adjust the outside mirrors
to center on the adjacent lane of traffic with a slight
overlap of the view obtained on the inside mirror.
WARNING!
Vehicles and other objects se
SEE MORE:
DTC P0973: Short in Shift Solenoid Valve A
Circuit
NOTE:
Before you troubleshoot, record all freeze data and any on-board
snapshot, and review General Troubleshooting Information.
This code is caused by an electrical circuit problem
and cannot be caused by a mechanical problem in the
transmission.
1. Clear the DTC with the HDS.
2. Start the
DTC P0705: Short in Transmission Range
Switch Circuit (Multiple Shift-Position Input)
NOTE:
Before you troubleshoot, record all freeze data and any on-board
snapshot, and review General Troubleshooting Information.
This code is caused by an electrical circuit problem
and cannot be caused by a mechanical problem in the
transmission.
1. Clear the DTC with the HDS.
2. Start the
© 2016-2023 Copyright www.hcrv.net
