Honda CR-V: How the Side Airbag Off Indicator Works
Honda CR-V (2006–2011) Owner's Manual / Driver and Passenger Safety / Additional Information About Your Airbags / How the Side Airbag Off Indicator Works
This indicator alerts you that the passenger’s side airbag has been automatically shut off. It does mean there is a problem with your side airbags.
not
When you turn the ignition switch to the ON (II) position, the indicator should come on briefly and then go off. If it doesn’t come on, stays on, or comes on while driving without a passenger in the front seat, have the system checked.
READ NEXT:
How the Passenger Airbag Off Indicator Works
This indicator alerts you that the
passenger’s front airbag has been
shut off because weight sensors
detect about 65 lbs (29 kg) or less
(the weight of an infant or small
child) on the
Airbag Service
Your airbag systems are virtually
maintenance free, and there are no
parts you can safely service.
However, you must have your
vehicle serviced if:
An airbag ever inflates. Any airbag
that h
Additional Safety Precautions
Do not attempt to deactivate your
airbags. Together, airbags and
seat belts provide the best
protection.
Do not tamper with airbag
components or wiring for any
reason. Tampering could cause
SEE MORE:
Using a Booster Seat
A child who has outgrown a forwardfacing
child seat should ride in a
back seat and use a booster seat
until the lap/shoulder belt fits them
properly without the booster.
Some states, Canadian provinces and
territories also require children to
use a booster seat until they reach a
Boot Band Installation
Special Tools Required
Boot band tool, KD-3191 or equivalent, commercially
available
Boot band pliers, Kent-Moore J-35910 or equivalent,
commercially available
Double Loop Type
1. Fit the boot ends onto the driveshaft and the
inboard joint, then install the new double loop band
(A) onto the boot.
N
© 2016-2025 Copyright www.hcrv.net
