Honda CR-V: EGR Passage Removal and Installation
Removal
1. Drain the engine coolant.
2. Remove the air cleaner housing.
3. Remove the harness holder (A) from the bracket,
then remove the harness holder bracket (B).

4. Remove the upper radiator hose (A), heater hose
(B), and water bypass hose (C).

5. Remove the air cleaner housing brackets.

6. Disconnect the exhaust gas recirculation (EGR)
valve connector.
7. Remove the EGR passage.

8. Remove the EGR valve.

Installation
1. Install the EGR valve (A) with a new gasket (B).

2. Install the EGR passage (A) with a new gasket (B).

3. Connect the EGR valve connector.
4. Install the air cleaner housing brackets.

5. Install the upper radiator hose (A), heater hose (B),
and water bypass hose (C).

6. Install the harness holder bracket (A), then install
the harness holder (B).

7. Install the air cleaner housing.
8. Refill the radiator with engine coolant, and bleed
the air from the cooling system with the heater
valve open (see step 6).
READ NEXT:
Removal
1. Remove the hood support rod, then use it as shown
to prop the hood in the wide-open position.
2. Remove the bulkhead cover.
3. Disconnect the fan motor connectors (A) and hood
switch conn
For Japan-produced Model
1. Drain the engine coolant.
2. Remove the hood support rod, then use it as shown
to prop the hood in the wide-open position.
3. Remove the bulkhead cover.
4. Remove the co
Component Location Index
RADIATOR FAN RELAY
A/C CONDENSER FAN RELAY
FAN CONTROL RELAY
A/C CONDENSER FAN ASSEMBLY
RADIATOR FAN ASSEMBLY
ENGINE COOLANT TEMPERATURE
(ECT) SENSOR 1
E
SEE MORE:
The National Highway Traffic Safety
Administration and Transport
Canada recommend that all children
aged 12 and under be properly
restrained in a back seat.
If the passenger’s front airbag
inflates in a moderate to severe
frontal collision, the airbag can cause
serious injuries to a
DTC P0455: EVAP System Large Leak
Detected
DTC P0456: EVAP System Very Small Leak
Detected
NOTICE
The fuel system is designed to allow specified
maximum vacuum and pressure conditions. Do not
deviate from the vacuum and pressure tests as
indicated in these procedures. Excessive pressure/
vacuum wou
© 2016-2025 Copyright www.hcrv.net
