Honda CR-V: Frame

Under-cowl Panel Replacement

NOTE: Take care not to scratch the body.

1. Remove these items:

2. Remove the bolts and nuts, disconnect the connector (A) and remove the grommet (B), then remove the under-cowl panel (C).

Honda CR-V. Frame

3. Install the under-cowl panel in the reverse order of removal.

Upper Dashboard Support Gusset Replacement

Upper Dashboard Support Gusset Torque

NOTE: Take care not to scratch the body.

Honda CR-V. Frame

Rear Damper Gusset Replacement

Rear Damper Gusset Torque

NOTE: Take care not to scratch the body.

Honda CR-V. Frame

Subframe Replacement

Front Subframe Torque

NOTE:

Honda CR-V. Frame

Rear Subframe Torque

NOTE:

Honda CR-V. Frame

Frame Repair Chart

Top View

Honda CR-V. Frame

Honda CR-V. Frame

Side View

Honda CR-V. Frame

Honda CR-V. Frame

READ NEXT:

 HVAC (Heating, Ventilation, and Air Conditioning)

Special Tools Backprobe set Component Location Index SERVICE VALVE (HIGH-PRESSURE SIDE) SERVICE VALVE (LOW-PRESSURE SIDE) EVAPORATOR CORE (Located-in the heater unit) RECEIVER/DRYER DESIC

 A/C Service Tips and Precautions

WARNING Compressed air mixed with the R-134a forms a combustible vapor. The vapor can burn or explode causing serious injury. Never use compressed air to pressure test R-134a service equipment

 System Description

The air conditioning system removes heat from the passenger compartment by transferring heat from the ambient air to the evaporator. The evaporator cools the air with the refrigerant that is circula

SEE MORE:

 All Children Should Sit in a Back Seat

According to statistics, children of all ages and sizes are safer when they are restrained in a back seat. The National Highway Traffic Safety Administration and Transport Canada recommend that all children aged 12 and under be properly restrained in a back seat. Some states have laws

 DTC P0111: IAT Sensor Circuit Range/Performance Problem

NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information. 1. Check for poor connections or loose terminals at ECT sensor 1/2 and the IAT sensor. Are the connections and terminals OK? YES-Go to step 2. NO-Repair the connecto

© 2016-2026 Copyright www.hcrv.net