Honda CR-V: To Remove Exterior Frost or Ice Fromthe Windows

Honda CR-V (2006–2011) Owner's Manual / Features / Vents, Heating, and A/C / To Remove Exterior Frost or Ice Fromthe Windows

1. Select automatically switches to fresh air. The system automatically switches to fresh air mode and turns on the A/C.

The A/C indicator does not come on if it was off to start with.

2. Select 3. Set the fan and temperature.

3. Set the fan and temperature controls to maximum level.

To clear the windows faster, you can close the dashboard corner vents by rotating the wheel below each vent.

This sends more warm air to the windshield defroster vents. Once the windshield is clear, select fresh air mode to avoid fogging the windows.

For your safety, make sure you have a clear view through all the windows before driving.

READ NEXT:

 To Turn Everything Off

Turning the fan speed control dial all the way to the left shuts the system off. Keep the system off for short periods only. To keep stale air and mustiness from collecting, you should have

 Climate Control System

Climate Control System

 Voice Control System

On vehicles with navigation system The climate control system for your vehicle can also be operated using the voice control system. See the navigation system manual for complete details.

SEE MORE:

 Traction

The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performa

 General Troubleshooting Information

How to Check for DTCs with the Honda Diagnostic System (HDS) When the powertrain control module (PCM) senses an abnormality in the input or output system, the D indicator (A) in the gauge control module (tach) (B) will usually blink. When the Honda Diagnostic System (HDS) is connected to the data l

© 2016-2025 Copyright www.hcrv.net