Honda CR-V: Dual Temperature Control

EX-L model only

EX-L model only

The temperatures of the driver’s side and the front passenger’s side can be controlled independently when the indicator in the DUAL button is on.

To adjust the driver’s side, turn the driver’s side temperature control dial on the climate control panel. To adjust the passenger’s side, turn the passenger’s side temperature control dial.

Temperature Control

Push AUTO or temperatures appear in the display.. The selected temperatures appear in the display.

When the indicator in the DUAL button is off, you can adjust both sides to the same temperature by adjusting the driver’s temperature control dial.

To set the driver’s side temperature

To set the driver’s side temperature to a different value than the passenger’s side, press the DUAL button, then turn the temperature control dial on the control panel. To set the passenger’s side to a different value than the driver’s side, turn the passenger’s side temperature control dial. You can adjust the passenger’s side without pressing the DUAL button first.

When you set the temperature to its lower limit or its upper limit, it will be displayed as ‘‘Lo’’ or ‘‘Hi’’.

READ NEXT:

 Climate Control Sensors

Sunlight and Temperature Sensors The climate control systemhas two sensors: a sunlight sensor on top of the dashboard, and a temperature and humidity sensor next to the steering column. D

 Audio System

An audio system is standard on all models. Read the appropriate pages (as shown below) to use your vehicle’s audio system. Audio System

 Playing the AM/FM Radio (LX model)

Playing the AM/FM Radio (LX model)

SEE MORE:

 ATF Replacement

NOTE: Keep all foreign particles out of the transmission. 1. Park the vehicle on the level ground. 2. Warm up the engine to normal operating temperature (the radiator fan comes on), and turn the engine off. 3. Remove the drain plug (A), and drain the automatic transmission fluid (ATF). NOTE: If

 Pump

Pump Replacement 1. Place a suitable container under the vehicle. 2. Drain the power steering fluid from the reservoir. 3. Remove the drive belt (A) from the pump pulley. 4. Cover the auto-tensioner, alternator, and A/C compressor with several shop towels to protect them from spilled power steeri

© 2016-2025 Copyright www.hcrv.net