Honda CR-V: A FewWordsAbout Safety

Honda CR-V (2006–2011) Owner's Manual / A FewWordsAbout Safety

Your safety, and the safety of others, is very important. And operating this vehicle safely is an important responsibility.

To help you make informed decisions about safety, we have provided operating procedures and other information on labels and in this manual. This information alerts you to potential hazards that could hurt you or others.

Of course, it is not practical or possible to warn you about all the hazards associated with operating or maintaining your vehicle. You must use your own good judgement.

You will find this important safety information in a variety of forms, including:

Safety Labels - on the vehicle.

Safety Messages - preceded by a safety alert symbol and one of three signal words: DANGER, WARNING, or CAUTION.

You WILL be KILLED or SERIOUSLY

You WILL be KILLED or SERIOUSLY HURT if you don’t follow instructions.

You CAN be KILLED or SERIOUSLY

You CAN be KILLED or SERIOUSLY HURT if you don’t follow instructions.

You CAN be HURT if you don’t follow

You CAN be HURT if you don’t follow instructions.

Safety Headings - such as Important Safety Reminders or Important Safety Precautions.

Safety Section - such as Driver and Passenger Safety.

Instructions - how to use this vehicle correctly and safely.

This entire book is filled with important safety information - please read it carefully.

READ NEXT:

 Important Handling Information

Your CR-V has higher ground clearance than a passenger vehicle designed for use only on pavement. Higher ground clearance has many advantages for off-highway driving. It allows you to travel ove

 Overview of Contents

Contents A convenient reference to the sections in this manual. Your Vehicle at a Glance A quick reference to the main controls in your vehicle. Driver and Passenger Safety Important informat

 Your Vehicle at a Glance

SEE MORE:

 Driver's Airbag Replacement

Removal 1. Disconnect the negative cable from the battery and wait at least 3 minutes before beginning work. 2. Remove the access panel (A) from the steering wheel, then disconnect the driver's airbag 4P connector (B) and horn switch 1P connector (C) from the cable reel. 3. Using a TORX T30 bit, r

 Installing a Child Seat with a Lap/Shoulder Belt

When not using the LATCH system, all child seats must be secured to the vehicle with the lap part of a lap/ shoulder belt. In addition, the lap/shoulder belts in all seating positions except the driver’s have a lockable retractor that must be activated to secure a child seat. If yo

© 2016-2025 Copyright www.hcrv.net