Honda CR-V manuals

Honda CR-V: Using the A/C

Honda CR-V (2006–2011) Owner's Manual / Features / Vents, Heating, and A/C / Using the A/C

Air conditioning places an extra load on the engine. Watch the engine coolant temperature gauge. If it moves near the red zone, turn off the A/C until the gauge reading returns to normal.

1. Turn on the A/C by pressing the button. The indicator in the button comes on when a fan speed is selected.

2. Make sure the temperature is set to maximum cool.

3. Select 4. If the outside air is humid, select.

4. If the outside air is humid, select recirculation mode. If the outside air is dry, select fresh air mode.

5. Set the fan to the desired speed.

If the interior is very warm, you can cool it down more rapidly by partially opening the windows, turning on the air conditioning, and setting the fan to maximum speed in fresh air mode.

To cool the interior with MAX A/C:

1. Set the fan to the desired speed.

2. Select MAX A/C.

The system automatically turns on the A/C, selects switches to recirculation mode., and switches to recirculation mode.

3. Make sure the temperature is set to maximum cool.

READ NEXT:

 Dehumidify the Interior

Air conditioning, as it cools, removes moisture from the air.When used in combination with the heater, it makes the interior warm and dry and can prevent the windows from fogging up. 1. Tur

 To Defog and Defrost

To remove fog from the inside of the windows: 1. Set the fan to the desired speed, or high for faster defrosting. 2. Select . The system automatically switches to fresh air mode and turns o

 To Remove Exterior Frost or Ice Fromthe Windows

1. Select . The system automatically switches to fresh air mode and turns on the A/C. The A/C indicator does not come on if it was off to start with. 2. Select . 3. Set the fan and temperat

SEE MORE:

 DTC P2227: BARD Sensor Range/Performance Problem

NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information. If DTC P0101, P0108, P1128, and/or P1129 are stored at the same time as DTC P2221, troubleshoot those DTCs first, then recheck for DTC P2221. 1. Turn the ignit

 Openers

Component Location Index HOOD OPENER CABLE Replacement FUEL FILL DOOR OPENER Replacement TAILGATE LATCH Replacement FUEL FILL DOOR LATCH Replacement FUEL FILL DOOR OPENER CABLE Replacement HOOD RELEASE HANDLE Replacement HOOD LATCH Replacement Fuel

© 2016-2025 Copyright www.hcrv.net