Honda CR-V: Using Automatic Climate Control
The automatic climate control system in your vehicle maintains the interior temperature you select. The system also adjusts the fan speed and airflow levels.
1. Press the AUTO button.
2. Set the desired temperature by turning the driver’s side temperature control dial. You will see AUTO and the selected temperature in the display. You can also set the passenger’s side temperature by turning the passenger’s side dial.
The system automatically selects the proper mix of conditioned and/or heated air that will, as quickly as possible, raise or lower the interior temperature to your preference.
Temperature Control
The driver’s side temperature and the passenger’s side temperature can be set separately. Turn the dial of the appropriate temperature control clockwise to increase the temperature of airflow. Turn the dial counterclockwise to decrease it.
Each set temperature is shown in the display.
When you set the temperature to its
lower limit (
) or its upper limit
(
), the system runs at full
cooling or heating only. It does not
regulate the interior temperature.
When the indicator in the dual button is on, the driver’s side and passenger’s side temperature can be controlled independently.
Dual Button
You can set the temperatures for the driver’s side and the passenger’s side separately when this button is pressed (indicator is on). When the indicator in the DUAL button is off, the temperatures for both sides are synchronized to the driver’s side set temperature. When defrost mode is selected, dual mode operation is canceled.
READ NEXT:
To Turn Everything Off
If you press the OFF button, the
climate control system shuts off
completely.
Keep the system completely off
for short periods only.
To keep stale air and mustiness
from collecting, you shou
Semi-automatic Operation
You can manually select various
functions of the climate control
system when it is in fully automatic
mode. All other features remain
automatically controlled. Making any
manual selection ca
Fan Control
Select the fan speed by pressing
either side of the fan speed control
bar ( or ).
The fan speed is
shown in vertical bars on the display.
Air Conditioning (A/C) Button
This button turns
SEE MORE:
Using the Heater
The heater uses engine coolant to
warm the air. If the engine is cold, it
will be several minutes before you
feel warm air coming from the
system.
1. Select
.
When you select
, the system
automatically switches to fresh air
mode. If you switch the mode
from
or
, the system
als
Fuel Pump Circuit Troubleshooting
If you suspect a problem with the fuel pump, check that
the fuel pump actually runs; when it is on, you will hear
some noise if you listen to the fuel fill port with the fuel
f ill cap removed. The fuel pump should run for
2 seconds when the ignition switch is first turned on. If
the fuel pump does
