Honda CR-V: Side Engine Mount Replacement

1. Support the engine with a jack and wood block under the oil pan.

2. Remove the power steering (P/S) fluid reservoir from the holder.

3. Remove the upper torque rod.

Honda CR-V. Side Engine Mount Replacement

4. Remove the ground cable (A), then remove the side engine mount bracket (B).

Honda CR-V. Side Engine Mount Replacement

5. Remove the side engine mount stiffener (A), then remove the side engine mount (B).

Honda CR-V. Side Engine Mount Replacement

6. Install the side engine mount, then install the side engine mount stiffener.

7. Install the side engine mount bracket (A), then loosely tighten the new bolt and nut (B), and loosely tighten the bolt (C).

Honda CR-V. Side Engine Mount Replacement

8. Install the ground cable (D).

9. Remove the air cleaner housing assembly.

10. Loosen the transmission mounting bolt and nuts (A).

Honda CR-V. Side Engine Mount Replacement

11. Raise the lift to full height.

12. Loosen the lower torque rod mounting bolt (A).

Honda CR-V. Side Engine Mount Replacement

13. Lower the vehicle on the lift.

14. Tighten the side engine mount mounting bolts and nut.

Honda CR-V. Side Engine Mount Replacement

15. Tighten the transmission mounting bolt and nuts.

Honda CR-V. Side Engine Mount Replacement

16. Raise the lift to full height.

17. Tighten the lower torque rod mounting bolt.

Honda CR-V. Side Engine Mount Replacement

18. Lower the vehicle on the lift.

19. Install the air cleaner housing assembly.

20. Install the upper torque rod, then tighten the new upper torque rod mounting bolts in the numbered sequence shown.

Honda CR-V. Side Engine Mount Replacement

READ NEXT:

 Transmission Mount Replacement

1. Loosen the upper torque rod mounting bolt (A). 2. Remove the air cleaner housing assembly. 3. Remove the powertrain control module (PCM) cover, then remove the three bolts securing the PCM. 4. R

 Side Engine Mount Bracket Replacement

1. Support the engine with a jack and wood block under the oil pan. 2. Remove the upper torque rod. 3. Remove the ground cable (A), then remove the side engine mount bracket (B). 4. Install the sid

 Cylinder Head

Special Tools Air Pressure Regulator Valve Guide Reamer, 5.5 mm Socket, 19 mm Holder Handle Adjuster Locknut Wrench Stem Seal Driver VTEC Air Adapter VTEC Air Stopper Air Joint Adapter C

SEE MORE:

 Tire Pressure Monitoring System (TPMS)

Your vehicle is equipped with a tire pressure monitoring system (TPMS) that turns on every time you start the engine and monitors the pressure in your tires while driving. Each tire has its own pressure sensor (not including the spare tire). If the air pressure of a tire becomes signif

 Rear Window Defogger

The rear window defogger will clear fog, frost, and thin ice from the window. Push the defogger button to turn it on and off. The indicator in the button comes on to show the defogger is on. It also shuts off when you turn off the ignition switch. You have to turn the defogger on a

© 2016-2025 Copyright www.hcrv.net