Honda CR-V: Dehumidify the Interior

Air conditioning, as it cools, removes moisture from the air.When used in combination with the heater, it makes the interior warm and dry and can prevent the windows from fogging up.

1. Turn the fan on.

2. Turn on the air conditioning.

3. Select 4. Adjust the temperature to your and fresh air mode.

4. Adjust the temperature to your preference.

This setting is suitable for all driving conditions whenever the outside temperature is above 32°F (0°C).

READ NEXT:

 To Defog and Defrost

To remove fog from the inside of the windows: 1. Set the fan to the desired speed, or high for faster defrosting. 2. Select . The system automatically switches to fresh air mode and turns o

 To Remove Exterior Frost or Ice Fromthe Windows

1. Select . The system automatically switches to fresh air mode and turns on the A/C. The A/C indicator does not come on if it was off to start with. 2. Select . 3. Set the fan and temperat

 To Turn Everything Off

Turning the fan speed control dial all the way to the left shuts the system off. Keep the system off for short periods only. To keep stale air and mustiness from collecting, you should have

SEE MORE:

 Wiper/Washer Switch Test/Replacement

1. Remove the steering column covers. 2. Disconnect the dashboard wire harness 8P connector (A) from the wiper/washer switch (B). 3. Remove the two screws, then slide out the wiper/ washer switch. 4. Inspect the connector terminals to be sure they are all making good contact. If the terminals a

 EGR System

Component Location Index EXHAUST GAS RECIRCULATION (EGR) VALVE POWERTRAIN CONTROL MODULE (PCM) EXHAUST GAS RECIRCULATION (EGR) PLATE DTC Troubleshooting DTC P0401: EGR Insufficient Flow NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review the genera

© 2016-2025 Copyright www.hcrv.net