Honda CR-V: Using the Heater

The heater uses engine coolant to warm the air. If the engine is cold, it will be several minutes before you feel warm air coming from the system.

1. Select When you select.

When you select automatically switches to fresh air, the system automatically switches to fresh air mode. If you switch the mode from , the system or also automatically turns on the, the system also automatically turns on the A/C. This helps prevent the windows from fogging up unintendedly. The A/C indicator will not come on if it was off to start with (see the first column on this page).

2. Set the fan to the desired speed.

3. Adjust the warmth of the air with the temperature control dial.

READ NEXT:

 Using the A/C

Air conditioning places an extra load on the engine. Watch the engine coolant temperature gauge. If it moves near the red zone, turn off the A/C until the gauge reading returns to normal. 1.

 Dehumidify the Interior

Air conditioning, as it cools, removes moisture from the air.When used in combination with the heater, it makes the interior warm and dry and can prevent the windows from fogging up. 1. Tur

 To Defog and Defrost

To remove fog from the inside of the windows: 1. Set the fan to the desired speed, or high for faster defrosting. 2. Select . The system automatically switches to fresh air mode and turns o

SEE MORE:

 DTC Troubleshooting

DTC indicator 1: An Open in the Air Mix Control Motor Circuit 1. Start the engine. 2. Turn on the A/C, then set the temperature control dial to Max Hot. 3. Turn the ignition switch OFF and then ON (II). 4. Do the self-diagnostic with the HVAC control unit. 5. Check for DTCs. Is DTC 1 indicated?

 Engine Lubrication

Special Tools Oil Filter Wrench Component Location Index OIL PAN WASHER DRAIN BOLT OIL PUMP OIL PUMP CHAIN GUIDE OIL PUMP CHAIN TENSIONER OIL CONTROL ORIFICE OIL FILTER OIL FILTER FEED PIPE OIL FILTER BASE ENGINE OIL GALLERY CAP OIL PRESSURE SWITCH Sym

© 2016-2025 Copyright www.hcrv.net